Say Goodbye to Popcorn Ceiling: Step-by-Step Removal Guide

Say Goodbye to Popcorn Ceiling: Step-by-Step Removal Guide
Say Goodbye to Popcorn Ceiling: Step-by-Step Removal Guide
Popcorn ceilings, a textured covering popular in homes from the 1950s to the 1980s, can make a room look dated and dark. However, there is good news:

you can easily remove this texture to reveal a smoother surface underneath. Here is a step-by-step guide on how to do it.

During the specified period, especially in bedroom ceilings, a rough, ridged texture known as “popcorn” became a popular choice for many new homes. It was favored for its soundproofing properties and ability to hide ceiling imperfections, making it convenient for professional architects. However, the downside to popcorn ceilings is that they do not reflect much light, resulting in a darker room ambience. Additionally, many homeowners find them unsightly.
continued on next page

you can easily remove this texture to reveal a smoother surface underneath. Here is a step-by-step guide on how to do it.

Luckily, getting rid of popcorn ceilings is a simple process, although it can be messy and require some effort. Despite the laborious effort, the results of the renovation project are completely worth it. By removing the popcorn texture, you can freshen up the look of the room and create a brighter, more modern space.

First and foremost, it is crucial to have the popcorn tested by an EPA-approved lab. In homes built before 1982, asbestos was the main ingredient in the texture of sprayed ceilings. If it is found to contain asbestos, it is highly recommended to hire a professional trained and licensed to handle hazardous materials. On the other hand, if an inspection shows a ceiling with a paper popcorn finish, you can remove it yourself. However, since it is a water-based operation, it is wise to turn off the power to the room you are working in.
continued on next page

There is nothing left for you to do. The only way to remove a popcorn ceiling is to create a mess. However, by properly preparing the room beforehand, you can minimize the cleanup after the project is complete. After removing all furniture from the room, cover the floor and the bottom 16 inches of each wall with a heavy plastic sheeting. Secure the tarp with tape.
The upper walls should also be protected. Tape around the perimeter of the room, 1/4 inch below the ceiling. Secure it with more tape over the top. Ceiling lights can be in the way at this point, so if you have ceiling fans, center crown molding, or pendant lights, it is recommended that you remove them at this point.
Divide the ceiling into 4-foot square sections. Then, using a garden sprayer, thoroughly wet the first section and let the water soak in for 10-15 minutes. Once you have waited long enough, place a ladder under the dampened section, put on a dust mask and safety glasses, and climb up the ladder. Place the putty knife at a 30-degree angle to the ceiling and begin scraping off the popcorn. The method is to spray, wait, and scrape. Work in this manner, one section at a time, around the room.

Continue until you have removed the popcorn ceiling, exposing the drywall surface underneath. Now that you have prepared the room by covering the walls and floor with plastic sheeting, you may want to apply a coat of primer and paint the ceiling. In this case, remove the sheeting after the final coat of paint has dried. However, don’t forget to reinstall the ceiling and reconnect the power. You will notice that everything looks brighter in a space without popcorn. Right? Enjoy.